2 Ways to Recover Windows Password

Open Tipard Windows Password Reset, and you will see the two options like Create Password Reset CD, DVD, and Create Password Reset USB Flash Drive. Supposing you want to select CD or DVD, you can click the Burn CD/DVD.

Below the options, you will notice the burning process, the yellow-orange bar, and the Writing. After that, tap the OK button once it is done burning.

Following that, withdraw your CD or DVD and insert the CD or DVD into your locked Windows computer. Then, enter the Windows Preinstallation Environment based on the prompt on your PC. Once it has been done, look for the CD-ROM Drive since you use a CD or DVD.

Select Windows or Account. You need to ensure that you select the correct Windows. As you notice in the picture, the available Windows for us is Windows 8.1 Pro. Now, select the available Windows on your computer.

Next, tap the Reset or Recover Password on the left side of the window, and a new panel will pop up where you can select the button Yes or No.

The new panel will ask if you want to set this user password blank. Then, click the Yes button.

You can go on selecting the Reboot button after clicking the Yes button on the panel. After that, another window will pop up, reminding you to eject your boot disk. Then, it will ask you to restart your computer. To restart your computer, tap the Yes button.

Once you downloaded PassFab 4Winkey successfully, you can now install and launch it to your accessible PC or Mac, and you will see its main interface.

Next to that, tap the Start button on the lower part of the interface, and you will immediately notice the progress. In addition, you will also see the percent of the process with the loading bar. Then, wait for a moment to start creating a bootable disk.

You will immediately see the box in the middle part of the interface of PassFab 4Winkey. Now, you need to choose between the two boot media: CD or DVD and USB Flash Drive. After selecting the boot media you prefer, select the Next button on the lower-right side of the interface

After that, a new window will appear. PassFab 4Winkey will update you that the burning process might erase all your data on what type of media you choose. Then, if you agree, tap the Next button.

After tapping the Next button, you will notice the loading bar under the box and see the progress percentage. Then, please wait for the burning process until it is finished.

Launch the Boot Setup Utility. After that, you will see all the choices like Main, Advanced, Power, Boot, Security, and Exit. Then, tap the Boot option.

Next to that, you will notice the Boot Device Priority, and under that, you will also see the choice like Hard Disk Drives, Floppy Drives, and CDROM Drives. To Save and Exit, click the F10 key on your keyboard, and if you want to Exit only, click ESC.

After that, select Boot Device Priority, and you will see other options such as 1st Boot Device, 2nd Boot Device, and 3rd Boot Device. Select the 1st Boot Device - Removable Dev and press F10 to Save and Exit.

Once the booting process is done, you must restart your PC and open Passab 4Winkey. After that, you will proceed to the main interface, select your Windows system, and tap the Next button.

Next, a new panel will pop up, asking you to enter the new password you want to reset or recover the selected account. Now, type your new password on the typing box and click the Reset button.

Next, a new panel will pop up, asking you to enter the new password you want to reset or recover the selected account. Now, type your new password on the typing box and click the Reset button.

Lastly, wait patiently and a new panel will appear and it will update you that your account has been recover. After that, click the Reboot button to reboot your PC.